Control Modules
The MAXIMATOR RM350 Series Control Modules are precision Gas Controllers for Assisted Injection Molding up to 350 bar. The Control Modules are equipped with 2 or 4 gas control valves. Two interfaces allow the RM 500 Series Gas Control Modules to work with 1 or 2 injection molding machines at the same time.
RM350 SeriesControl Module for Nitrogen up to 350 bar, equipped with a gas booster and core control packs as an option.The Control Modules of the RM350 Series are designed for the precise injection of nitrogen for Assisted Injection Molding processes up to 350 bar. Because of the modular design of this Control Modules, the RM350 Series can be equipped with an air driven Maximator gas booster as an option. This allows the nitrogen supply from standard nitrogen gas bottles. Furthermore, the Control Modules of the RM350 Series can be equipped with core control packs including controls for hydraulic cores to operate overspill pins or valve gates. This option is available as signals only or with integrated 2 or 4 valve hydraulic power pack.
RM350 Brochure |
![]() |
RM/500/2(4)/N2Control Module for nitrogen up to 500 BARThe RM/500/2(4)/N2 Control Module is designed for the exact injection of nitrogen in gas assisted molding processes. Depending on the design, the Control Module is equipped either with 2 or 4 highly-dynamic, Maximator 3/3-way proportional valves for the pressure control, and can optionally supply up to two injection molding machines.
|
![]() |
RM/500/2(4)/CO2Control Module for liquid carbon dioxide up to 500 barThe RM/500/2(4)/CO2 Control Module is designed for the exact injection of carbon dioxide in the new CO2 GIT process. Depending on the design, the Control Module is equipped either with 2 or 4 highly-dynamic, Maximator 3/3-way proportional valves for pressure control. As a result of the integrated 2.5 liter / 500 bar piston accumulator, a continuous volume flow is ensured for a stable process with high-quality results.
|
![]() |
MAXIMATOR Gas and Water Technology Brochure |